Millermatic® 212 907324

All Miller Electric products are sold and serviced by Weld Specialty Supply Corp. an authorized Miller Electric Distributor.

Millermaitc MIG Welder - NEW! Millermatic 212

Millermatic 212 MIG welder welds material from 22 gauge up to 3/8 in (9.5 mm). It's easy to set up, offers a wide window of operation, and delivers 210 amps of power for semi-industrial applications. The Millermatic 212 offers superior performance on thin and medium gauge metals, with smooth arc characteristics throughout its operating range.

With single-phase power plus a factory-installed running gear/dual cylinder rack, the Millermatic 212 easily goes where it's needed. The system adds efficiency and productivity to light fabrication work, garage/body shops, and farms and ranches. Its cost and operating economics make it a smart choice. Its ease of use makes it a very effective machine for the hobbyist.

Processes:
MIG (GMAW)
Flux Cored (FCAW)

Applications

• Light Fabrication Garages/ Body Shops Vocational/Technical Schools Farm and Ranch
  
  Features:
  
  Seven taps provide wider welding range of 30-210 amps with improved high and low ends to weld materials from 22 gauge up to 3/8 in (9.5 mm) thick in a single pass.
  
  New! Angled, dual-gear-driven, cast aluminum drive system features no-tool, quick-change reversible drive rolls and easy-to-set, scaled tension knob.
  
  New! Patent-pending EZ-Change™ Low Cylinder Rack allows operators to easily roll cylinders on and off of rack - no need to lift cylinders.
  
  Add Optional Spoolmate™ 3035 spool gun for aluminum welding. Easy to install with direct hook up. And with Miller's exclusive Gun-On-Demand™, simply pull the trigger for either gun and you're ready to weld. No wasted time installing modules and using toggle switches.
  
  New! Thermal Overload Protection shuts down unit and activates over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when fault is corrected and unit cools.
  
  New! EZ-Access™ Consumable Compartment and Parameter Chart - convenient new flipdown compartment that provides fast access to parameter chart and consumables.
  
  New! Larger work area - now with longer 15-ft M-25 gun.
  
  
• Less weld cleanup with Active Arc Stabilizer - patented Miller design provides excellent starts proven superior to the competition.
  
  Comes complete with:
• 10 ft (3 m) power cord and plug
• New! 15 ft (4.6m), 250 amp M-25 MIG gun for .030/.035 in wire
• 10 ft (3 m) work cable and clamp
• Factory-installed dual gas solenoids
• Argon mix regulator/flow gauge w/hose
• New! Factory-installed running gear with EZ-Change™ Low Cylinder Rack
• .030/.035 in reversible drive rolls
• Extra contact tips
•