SP-175
Plus 208/230/1/60 V With Cart K2300-1
Free Shipping!
The SP-175 Plus is all about power and control! This
work-loving compact, portable wire feeder/welder makes
MIG or flux-cored welding on mild steel loads of fun.
MIG welding on stainless steel or aluminum is a pleasure
too. Continuous output controls on the 208/230V powered
SP-175 Plus let you fine-tune both the wire feed speed
and the voltage output – so you get a quality weld time
after time! And getting started on your mild steel project
with MIG welding is easy – just add a cylinder of shielding
gas, everything else is right in the box!
Advantage Lincoln
• Unit Includes: Magnum® 100L gun and cable assembly
with .023/.025" contact tip, work cable and work clamp,
6 ft input power cord with NEMA Type 6-50P three-prong
plug, factory installed gas solenoid valve for MIG welding,
adjustable gas regulator for Ar and Ar-blend gases (regulator
requires an adapter — sold separately — for use with
CO2 cylinders), gas hose, 2 lb. spool .025" SuperArc™
L-56 mild steel MIG wire, one .030" contact tip, one
.035" contact tip and K2275-1 Utility Cart.
• Ready To Weld! Includes mild steel MIG wire and adjustable
gas regulator and hose kit. Just add shielding gas (sold
separately)
• Continuous full-range adjustment of voltage and wire
feed speed allows for fine-tuning of the arc and precise
control of heat input.
• MIG weld on mild steel as thin as 24 gauge with .025"
SuperArc™ L-56 wire. Flux-cored wire weld up to 5/16"
mild steel plate with Innershield® NR®-211-MP and up
to 1/2" plate with .045" Innershield NR-212. Add K663-2
to weld 22 gauge through 1/4" aluminum.
• Designed to feed .023-.035" (0.6-0.9mm) diameter mild
and stainless steel MIG wire, .035"-.045" (0.9mm-1.2mm)
diameter flux-cored wire and .035" diameter 4043 aluminum
MIG wire.
• Welder settings reference chart conveniently located
inside wire feed section door makes it easy to set the
machine for mild steel welding jobs.
• Gun trigger safety feature keeps welding wire electrically
"cold" until trigger is pressed.
• Adjustable brake spindle accommodates both 8" (200mm)
diameter and 4" (100mm) diameter spools of wire.
• Built-in "burnback" function insures proper wire stickout
after each weld with no sticking in the weld puddle.
• Engineered and built for dependable service and long
life expectancy.
• "Quick Release" idle pressure arm easily adjusts wire
tension for positive wire feeding.
• High torque low-RPM drive motor provides extra long
life and quiet operation.
• Electronic full range motor speed control compensates
for power supply variations to maintain constant wire
feed speed.
• Electronic and thermostatic protection from current
overload and excessive temperatures.
• UL listed and CSA approved.
• Three year warranty on parts and labor. (90 days warranty
on gun and cable).
• Manufactured under quality system certified to ISO
9001 requirements.
Physical specifications
Weight:60 lbs. (27 kgs. )
Dimensions (in) HxWxD:12x 9.75x 16.5
Dimensions (mm) HxWxD:305x 248x 419
Optional Accessories :
-
K586-1 - Deluxe Adjustable Gas Regulator and Hose Kit
-
K549-1 - Innershield Welding Kit (.035)
-
K549-4 - Innershield Welding Kit (.045)
- KP666-035C - Drive Roll Kit - .035 Cored Wire
- KP666-045C - Knurled Drive Roll Kit - .045 Flux-Cored
Wire
-
K663-2 - Aluminum Feeding Kit
Consumables
