Millermatic® 211 AutoSet
with MVP™
Welds material from 24 gauge to 3/8 in thick in a single pass.
Welding Capability
Not to scale
Mild Steel | Aluminum* |
 Min 24 ga (0.8 mm) |  Min 18 ga (1.2 mm) |
 Max 3/8" (9.5 mm) |  Max 3/8" (9.5 mm) |
| * w/Spoolmate 100 Series Spool Gun |
Auto-Set™ : The right settings automatically -
- Set the wire diameter, a blue light shows that Auto-Set™ is activated
- Dial in the thickness of what you're welding
- Start welding with the exact parameters you need!
Welds thickest material in its class!The Millermatic® 211 Auto-Set™ withMVP™ has the highest output in its class. It can weld from 24 ga-3/8 in (0.8-9.5 mm) mild steel in a single pass on 230 V.
Spool gun ready out of the box! Finally a reliable and economical way to weld aluminum. Hooked up to a Millermatic® 211 Auto-Set™
with MVP™
, the newSpoolmate™ 100 Series spool gunallows you to weld from 18 ga - 3/8 in aluminum.
Smooth-Start™ patented technology provides a smooth, spatter-free start. It's the best-starting machine in the small MIG machine category. No pop gun starts and virtually no spatter to clean up.
Miller Exclusive!Multi-voltage plug (MVP™)
allows you to connect to common 120 or 230 V power receptacles without the use of any tools - simply choose the plug that fits the receptacle and connect it to the power cord.
Durable cast aluminum drive systemincorporates dual-groove quick-change drive roll and spring-loaded tension arm with calibrated tension knob, all designed to make set up easier and faster.
Miller's exclusive "Tip Saver" short circuit protection™ shuts down output when tip is shorted to the work. Extends contact tip life and protects internal components from damage. Trigger reset permits quick reset at gun rather than at the machine.
Cable management built into the handle.
Thermal overload protection shuts down unit and activates over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when fault is corrected and unit cools.
Uses 4 or 8 in (102 or 203 mm) spoolsand can be set up to weld with wire sizes .024-.035 in (0.6-0.9 mm) mild/stainless steel and .030-.045 in (0.8-1.2 mm) flux cored.
SPECIFICATIONS
Input Power
- 230 V, 25 A, 60 Hz, 1-Phase
- 120 V, 20 A, 60 Hz, 1-Phase
Rated Output
- 150 A at 23.5 VDC, 30% duty cycle (230V)
- 90 A at 20 VDC, 20% duty cycle (120V)
Welding Amperage Range
- 30 - 210 Amps
Wire Speed
- 60 - 460 IPM (1.5 - 11.7 m/min)
Net Weight
- 74lb (33.6 kg)
PROCESS
- MIG (GMAW)
- Flux Cored (FCAW)
COMES COMPLETE WITH
- Power source
- 6 ft (1.8 m) power cord and MVP™ plugs
- 10 ft (3 m) M-10 MIG gun and cable assembly
- 10 ft (3 m) work cable and clamp
- Smith® Argon and AR/CO2 mix regulator/flow gauge with hose
- Spool of Hobart® .030 in (0.8 mm) solid wire
- Two contact tips for .030 in (0.8 mm) wire and two contact tips for .035 in (0.9 mm) wire
- Dual groove quick-change drive roll for .024 in (0.6 mm) or .030/.035 in (0.8/0.9 mm) wire
- Factory-installed gas solenoid valve
- Set-up and operation CD
- Information/settings chart
- Material thickness gauge (#229 895)
With the best coverage in the industry - Miller's True Blue® Warranty [PDF] delivers unparalleled peace-of-mind.
With a support system of more than 800 authorized service distributors world-wide - each staffed with factory trained, experienced and knowledgeable professionals - Miller provides you with the warranty service and genuine Miller replacement parts you require.
We understand that you need your machine as soon as possible. That is why we ensure a quick and reliable response, every time. Miller's Signature Service program guarantees to ship all available warranty items to your Miller service distributor's hands within 24 hours.
APPLICATIONS
Light Industrial Applications
- Light Fabrication
- Maintenance and Repair
- Garage/ Body Shop
- Farm/Home
Order Online or call us 1-877-532-WELD (9353). International orders please call (920) 882-0805.
Why WeldingMart.com
- Award Winning Service
- Authorized Retailer
- Fair Price Retailer
- Expert Sales Advice
