At
Your Service - Everyday!
The Ranger 10,000 is the right choice for a general
contractor, maintenance team, farmer or home owner
looking for a sizable 9,000 continuous watts (10,000
peak) for lights, tools and emergency standby
power, mated with an AC/DC stick welder. In addition,
the Ranger 10,000 extends your welding capability
with basic TIG, MIG and Flux-Cored welding.
Processes
Stick TIG MIG Flux-Cored Gouging
Advantage Lincoln
• 9,000 watts continuous (10,000 watts peak) AC
generator power
for high capacity needs such as a back-up generator,
or powering
Pro-Cut® plasma cutters and Invertec® inverter
welders , as well
as lights, grinders and other power tools.
• Smooth AC/DC welding output for a broad range
of stick electrodes,
such as Lincoln Excalibur™ 7018 (AWS E7018) and
Fleetweld® 5P+ (AWS E6010). Also capable of MIG,
Flux-Cored,
and basic TIG welding.
• Rated 225 amps/25 volts for AC, 210 amps/25
volts for DC and
200 amps/20 volts for CV. All rated outputs at
100% duty cycle
104°F (40°C).
• Simultaneous welding and auxiliary power loads
– For example,
at 125 amps of welding output, you can still power
up to
3,950 watts for lights, grinders and other power
tools.
• Rugged Reliability – Rangers have been subjected
to an extensive
testing program to ensure reliable operation in
a wide variety
of environmental conditions.
• engine choices – Kohler® gasoline.
2 cylinder 4 cycle OHV (overhead valve) air-cooled.
• Easy to Maintain – Engines require an oil change
only every
100 hours and every 200 hours for the oil filter.
• Three year Lincoln warranty (engine is warranted
separately by
Recommended General Options
Power Plug Kit (20 amp), Power Plug Kit (15 amp),
Full-KVA Power
Plug, GFCI Receptacle Kit (20 amp), Spark Arrester
Kit, Canvas
Cover, Hand Moving Undercarriage, Four Wheeled
Undercarriage,
All-Terrain Undercarriage, Factory Undercarriage,
Small Two
Wheel Welder Trailer
Recommended Stick Options
Accessory Kit
Recommended Wire Feeder Options
K1419-4 Ranger 10,000 (Kohler® OHV Command CH20S
Engine)
LN-25, LN-15 Across-The-Arc Wire Feeder, Magnum
350 Innershield®
Gun, Magnum 200 MIG Gun, Magnum Gun Connector
Kit
Recommended TIG Options
Pro-Torch® PTA-26V TIG Torch, Magnum® Parts Kit,
TIG Module,
Control Cable, Arc Start Switch, Docking Kit,
Contactor Kit, Control
Cable Extension, Water Valve Kit
Recommended Plasma Cutting Options
Pro-Cut 55, Full KVA Adapter Kit
