Advantage
Lincoln
Weld with Lincoln's Chopper Technology. Easy
starts, smooth arc, low spatter and excellent
bead appearance.
A Powerful 300 Amp DC Multi-Process Diesel Engine
Driven Welder. All rated outputs at 100% duty
cycle 104°F (40°C).
Excellent DC Multi-Process Welding for General
Purpose Stick, Downhill Pipe Mode for Stick Welding,
TIG, Cored-Wire, MIG (CO2 and Blended Gas) and
Arc Gouging with Carbons Up to 3/16" in Diameter.
Enhanced downhill pipe welding mode. Fast travel
speeds, especially on fill passes. Arc control
adjustment for softer or more forceful, digging
arc.
Voltage sensing arc cutoff in Touch-Start TIG
mode when torch is lifted at end of weld.
Designed Especially for Contractors, Maintenance
& Repair, Owner-Operators, and Welding Professionals
Who Demand the Best Welding Arc.
A Portable Powerhouse - Delivers 9,500 Continuous
(10,000 Peak) Watts of 120V/240V AC Generator
Power. Enough power to run lights, tools, pump
and weld all at the same time!
Fully Enclosed Case for Equipment Protection
and Low Noise.
Approved by Canadian Standards Association (CSA).
Manufactured under a quality system certified
to ISO 9001 requirements.
Three year Lincoln warranty. (Engine is warranted
separately by the manufacturer.)
Processes - Stick TIG MIG Flux-Cored Gouging
Physical specifications
Weight:698 lbs. (317 kgs.)
Dimensions (in) HxWxD:35.8 x 21.5 x 52.3
Dimensions (mm) HxWxD:909 x 546 x 1327
Welding Specifications
Rated CC DC Output Amps/Volts/Duty Cycle -
305/29/100%
Rated CV Output Amps/Volts/Duty Cycle - 300/29/100%
Output Range - 20-250A TIG - 20-305A DC - 40-300A
Pipe
Engine Specifications
Type of Engine - Kubota D722
Cylinders - 3
HP & Speed (rpm) - 18.8@3600
Generator Output - 9500 watts
Fuel Type - Diesel
Recommended Options
K1690-1 GFCI Receptacle Kit
K1783-9 PTA-26V TIG Torch (25 ft 2pc)
K1789-1 Roll Cage
K1816-1 Full-KVA Adapter Kit
K1898-1 Spark Arrester Kit
K704 Accessory Package
K802N Power Plug Kit
K802R Power Plug Kit
K857 Remote Output Control
K857-1 Remote Output Control
K870 Foot Amptrol
K957-1 Small Two-Wheel Welder Trailer
K958-1 Two Inch Ball Hitch
K958-2 Lunette Eye Hitch
K959-2 Fender and Light Kit
K963-2 Hand Amptrol
K965-1 Cable Storage Rack
Wire Feeders
K428 LN-25
K449 LN-25 w/Contactor & Gas Solenoid
K1870-1 LN-15 Across-the-Arc Model
K1871-1 LN-15 Control Cable Model
K487-25 Magnum SG Spool Gun 25 ft w/Remote
K2259-1 Cobramatic
