Free Shipping!
Why settle for less, when you can get more? The Ranger® GXT has all of the Xtras you need for construction and maintenance work. This Ranger delivers XTra welding performance with 250 amps for AC or DC stick and wire welding. And, it’s remote-ready for extended amperage control or AC TIG welding on aluminum with Lincoln’s optional TIG module.
The Ranger GXT generates XTra power, up to 11,000 watts peak, for lights, grinders and high amperage equipment such as Lincoln’s Pro-Cut® 55 plasma cutter. With the exclusive Lincoln enclosed case, you get XTra protection and XTra quiet operation. With the Ranger GXT, you get XTra value, without paying more.
Description
Processes
Stick TIG MIG Flux-Cored Gouging
Advantage Lincoln
XTra Performance!
• Rated 250 amps/25 volts for AC, DC and CV. All rated outputs at 100% duty cycle 104°F (40°C).
• Smooth AC/DC welding output for a broad range of stick electrodes, such as Lincoln Excalibur™ 7018 MR (AWS E7018) and Fleetweld® 5P+ (AWS E6010). Also capable of MIG, flux-cored, and TIG welding.
• Remote ready! 6-pin connector and local/remote switch for remote control operation. Also for AC/DC TIG Module use with foot or hand Amptrol®.
• Electric fuel gauge located on control panel makes it easy to check the fuel level during operation and refueling. Helps you virtually eliminate running low on fuel during critical jobs.
• New! Choice of mechanical fuel pump for most environments, or electric fuel pump for high altitude operation.
XTra Power!
• 11,000 Watts Peak Single-Phase AC Generator Power
- Most peak power in its class.
- Use peak power for motor starting.
• 10,000 Watts Continuous Single-Phase AC Generator Power
- Most continuous power in its class.
- For high capacity needs such as a back-up generator, powering a Pro-Cut® plasma cutter or an Invertec® inverter welder.
- For lights, a grinder or other power tools.
XTra Protection!
• Stainless steel roof, case sides, and engine doors.
• Engine doors provide protection and easy service access.
• Lower noise than partially-enclosed and unenclosed welders of comparable size 100.7dB (Lwa). Listen for yourself and hear the difference!
• Rugged Reliability — Rangers have been subjected to an extensive testing program to ensure reliable operation in a wide variety of environmental conditions.
• Three-year Lincoln warranty on welder (engine is warranted separately by the manufacturer).
Physical specifications
Weight:602 lbs. (273 kgs. )
Dimensions (in) H x W x D : 36.2 x 21.5 x 42.3
Dimensions (mm) H x W x D : 920 x 546 x 1073
Welding Specifications
Engine Specifications
| Rated CC AC Output Amps/Volts/Duty Cycle |
Rated CC DC Output Amps/Volts/Duty Cycle |
Rated CV Output Amps/Volts/Duty Cycle |
Output Range |
250/25/100% |
250/25/100% |
250/25/100% |
50-250A
AC/DC |
Type of Engine |
Cylinders |
HP & Speed (rpm) |
Generator Output |
Fuel Type |
Kohler OHV Command
CH23S |
2 |
23@3600 |
11000 watts peak
10000 watts continuous |
Gas |
Lincoln 2yr. Extended Warranty Benefits
- No out of pocket cost for repairs for the life of the extended warranty
- Parts and labor costs are fully covered.
- Repair worked performed by a nationwide network of Lincoln authorized repair facilities.
- Extended warranty program backed by Lincoln Electric, not a third party.
- Protect your investment for up to five full years.
Purchase Lincoln Warranty
