*Shipping TBD at time of
order. Welding Mart will call with shipping charges
after order is placed in order to get you the lowest
possible shipping rates due to products size &
weight.
Intermediate Fence Tape System with Quick Stop
The Intermediate Fence allows you to make safe
and accurate cuts on narrow material,
at waist height instead of having to bending down
to cut on the material rollers.
Unlike other panel saws that have only have a
short intermediate fence the Saw
Systems Intermediate Fences are full length and
will give the material being
cut full support. Available for the 5, 7-1/2 and 10
foot wide panel saws. The
intermediate fence on the left side will support
material being cut while the
intermediate fence on the right will keep the cut
end from hitting the floor.
May be purchased separately.
|
