*Shipping TBD at time of order. Welding Mart will call with shipping charges after order is placed in order to get you the lowest possible shipping rates due to products size & weight.

Razor Knife Plate Assembly

The sawsystems rkc features are:
•_Razor Knife Cutter - Patent Pending for the sawsystems rkc
•_Available For All models for the sawsystems rkc

Manufacturer Information for the sawsystems rkc

With our Patented Razor Knife Plate, that can make vertical or horizontal cuts, your new Saw System Panel Saw has transformed into a full size sheet cutter. You may cut or score many different materials with our Razor Knife Plate. Cutting materials such as Foam Board, Cardboard, corrugated PVC and Coroplast become easy tasks when using our patented Razor Knife Plate.

In operation the OFLA Razor Knife follows the same groove that the saw travels in the backer board. This is important because the blade can be adjusted to cut all the way through the material, to a depth of 1/8 inch into the backer board. A backer board is important because the material being has a solid surface to lie against. If you don’t have a backer board your material can bend away from the knife blade while you are cutting and cause a beveled edge and a wavy cut. Our backer board is designed so it doesn’t have to be removed when changing from Razor Knife Plate to the saw motor plate.

A unique feature, about this Patented Razor Knife Plate, is that you can slide the body of the knife down to the surface of the material then adjust the knife blade to cut through your material. Being able to do this will eliminate any blade deflection and ensure a true straight cut.