ESAB MiniArc 150 APS DC Stick Welder
#0558003314
The MiniArc 150 Automatic Primary Select operates on either 110 vac or 230
vac and will automatically configure for the primary input supplied by the customer.
Designed to provide outstanding welding performance for Stick welding.
- 18 lb weight makes this unit portable and easy to carry directly to the job.
- Convenient sturdy plastic case accommodates the MiniArc, welding cables, TIG
torch and other accessories.
- Direct connections for TIG torch and electrode holder for maximum convenience
and easy polarity change.
- TIG welding with touch-start ignition selectable from front panel.
- Protected against overheating and overcurrent.
- Small and portable, inverter based.
- 5 to 150 Amps current range for DC Welding.
- Continuous current control for easy fine tuning.
- Low current draw.
Specifications
Primary Input Voltage/Phase: 115/208/230 vac, 1 ph, 50/60 Hz
Voltage Tolerance: +/- 10%
115V Operating Data
- Output Range (Stick): 5A/20V to 85A/23.5V
- Stick Duty Cycle & Rated Output: 100% - 85A @ 23.4V
- Output Range (TIG): 5A/20V to 100A/14V
- TIG Duty Cycle & Rated Output: 100% - 100A @ 14.0V
- TIG Duty Cycle & Rated Output: 60% - 130A @ 15.0V
- Primary Input Current @ 100% Duty Cycle: 19A
- Primary Input Current @ 60% Duty Cycle: 26A
- Open Circuit Voltage (max): 83 V
230V Operating Data:
- Output Range: 5A/20V to 150A/26V
- Stick Duty Cycle: 110A/24.5V @ 100%, 140A/25.6V @ 60%
- TIG Duty Cycle: 110A/14.5V @ 100%, 150A/16V @ 60%
- Primary Input Current @ 100% Duty Cycle: 17A
- Primary Input Current @ 60% Duty Cycle: 23A
- Open Circuit Voltage (max): 83V
Net Weight: 18 lbs
W 5.75 in x L 15 in x H 11 in
Comes Complete With:
- Power Source
- 10 ft. Work cable & Clamp
- 10 ft. welding cable w/electrode holder
- 1# 6013LV electrodes
- Plastic carrying case
