ESAB Migmaster 203 MIG Welder
#0558005174
Industrial Ready-to-Weld MIG Package 
The Migmaster® 203 is the ideal welding machine for every light industrial shop
that wants rugged, simple equipment and high quality results. The Migmaster®
is a step-regulated welding power source designed for light and medium duty
applications. With a built-in wire feeder, it is the perfect, practical solution
for fabricators, vehicle repair shops and light production users.
Features
PSD™ Technology – excellent welding performance for a single phase machine.
The PSD™ (Power Smoothing Device™) produces a smooth 3-phase type arc, in a
1-phase power source. The Migmaster® has excellent arc characteristics when
MIG welding with either CO2 or Argon/CO2 shielding gas. The units are each equipped
with a multi-step voltage switch and wire speed control for easy setting of
welding parameters. Units are fan-cooled and equipped with thermal overload
protection.
MIG or FCAW - Easy to change polarity makes it simple to switch between
MIG solid wires and self-shielded flux cored wires. The Migmaster® is designed
to weld steel, stainless steel and aluminum
Easy to set welding parameters
Built-in Spot Timer – Standard
Built-in Burn back control – Standard
ESAB MX™ MIG Gun – Features enhanced gas-cooling for extended life.
The gun handle has a new ergonomic design. Spring loaded contact pins in the
central connector eliminate any possibility of pin misalignment.
Spool Gun Control with gun-on-demand – No separate spool gun module
to buy! Simply plug your optional MT-250SG spool gun into the receptacle and
you’re ready weld. Gun-on-demand circuitry automatically switches between MIG
gun and Spool Gun without having to disconnect anything.
Optional Digital Meter Kit - Field installed digital kit for more precise
control of welding parameters.
SPECIFICATIONS
- Input Voltage – 208/230 Vac, 1ph 50/60 Hz
- Welding Output – 200 Amps @ 20% duty cycle
- Wire Feed Speed – 39-670 IPM
- Voltage Steps – 12
- Dimensions – 34”L X 17”W X 29”H
- Weight – 159 lb.
Comes Complete With
- .023-.030 drive roll
- 10 ft. MXL 200 MIG Gun
- 10 ft. work cable with clamp
- 10 ft. primary input power cable with plug
- R-33 regulator/flowmeter with 5 ft. gas hose
- Undercarriage, cylinder rack with chain
- Instruction manual
