Multimaster 260 - 15ft, 208/230vac 1ph 50/60Hz Argon/ST-23A spoolgun.
Industrial Ready-To-Weld Multi-Process Package
Advanced SuperSwitchTM technology makes multiprocess welding a breeze. Simplified
setup makes it easy to select Mig, Tig, or Stick.
DC welding output from 15 to 300 amps; rated 260 amps at 50% duty cycle
Output Pre-Set Capability for Quick Set-Up
Two Digital Meters for Easy Fine Tuning
Heavy Duty Four Drive Roll Stand
Convenient, Large Capacity Built-In Tool Box
Dual “Easy-On” Cylinder Tray
Pulse Mig Capability with optional module
Specifications
Rated DCCV or DCCC Output (10 min base)
-50% duty cycle (NEMA Class I) ................ 260 amps @ 27 vdc
Output Current Range
-Mig (GMAW) ............................................................ 35-300
amps
-Tig (GTAW) .............................................................. 10-300
amps
-Stick (SMAW) ........................................................... 40-300
amps
Open Circuit Voltage
-Mig (MGAW) .......................................................................
70 vdc
-Tig (TGAW) .........................................................................
20 vdc
-Stick (SMAW) ......................................................................
70 vdc
Primary Input Voltage & Current @ 260 amp rated load
-208/230 vac, 60 Hz, 1 ph ...................................... 57/52 amps
Wire Feed Range ................................ 65-675 ipm (1.6 - 17.3 m/min)
Net Weight ............................................................ 250
lbs. (112.5 kg)
Shipping Weight .................................................. 290 lbs.
(130.5 kg)
W x L x H ...... 25.3 in. (64 cm) x 39.5 in. (100 cm) x 33.5 in. (85 cm)
Multimaster 260 cvcc Multi-Process Packages
Each of the following packages are set ready to run .035/.045 diameter wire.
Packages include:
- Power source with built-in four roll wire feeder
- Factory installed undercarriage & cylinder rack
- Gun Master 250 Amp "NAS" Mig Torch
- Gas regulator/flowmeter with hose
- Work cable & clamp
- Primary input cable
- Mig Welding Handbook
- 10# sample of .035 86HP III Wire and 5# sample Stick Electrodes.
- See back page for options and accesories.
MultiMaster 260, w/GM-250 “NAS” torch
Multimaster 260 - 15ft, 208/230vac 1ph 50/60Hz Argon/ST-23A ............0558001768
Optional Equipment
Pre/Post Flow/Spot/Burnback module ....................................... 0558002889
Inductance Control Module ..........................................................
0558002888
Remote Control Module ...............................................................
0558002605
FC-5B Foot Control - 30 ft. (9.1 m) cable
Provides remote current control and contactor (on/off) control ........... 33646
Spool Gun Module ........................................................................
0558002606
MT-250SG Spool Gun .............................................................................
36779
Requires Spool Gun module
ST-23A Spool Gun ...................................................................................
19164
Requires adapter 37301 and Spool Gun module
Pulse Module Option .....................................................................
0558002604
HW-17V-2TL (w/valve) Heliarc Tig Torch Assembly
Tig weld without disconnecting the Mig torch. 60 deg. 12.5 ft. .............
35857
HW-17V-2TL (w/valve) Heliarc Tig Torch Assembly
Tig weld without disconnecting the Mig torch. 60 deg. 25 ft. ............. 358576
HW-17 Torch Accessory Kit ...................................................................
999126
Work Cable & Clamp ................................................................................
35881
Electrode Holder Assembly - 175 amp (15 ft.)
Includes holder, cable and quick connector .................................
0558001786
Electrode Holder Assembly - 300 Amp (15 ft.)
Includes holder, cable and quick connector ............................................
21226
Tee Connector (1 male/ 2 female) ....................................................
13792804
Primary Extension Cord (25 ft.) ................................................................
37833
TIG Welding Handbook ...........................................................................
781F29
MIG Welding Handbook...........................................................................
791F18
