New! Miller's exclusive multi-voltage plug (MVP™) allows connection to 115 or 230 V receptacles without tools - choose the plug that fits the receptacle and connect it to the power cord.
STL: Provides the basic features that are required for most DC TIG or Stick welding applications.
Portable in the shop or at the job site - at 13.7 lb the shoulder strap allows the operator to easily move from location to location.
Auto-Line™ Power Management technology circuitry automatically connects to 115 - 230 VAC, single-phase power without removing the cover to relink the power source.
Low OCV Stick reduces open-circuit voltage to 12-16 VDC when power source is not in use.
Adaptive Hot Start for stick arc starts prevents electrode sticking.
Full function remote control allows operator to crater out when doing critical work. (6 pin foot or finger tip control available.)
Single Amperage Range allows operator to accurately set amperage on both 115 V or 230 V primary power.
Lift-Arc™ start provides TIG arc starting without the use of high frequency.
Built-in gas solenoid eliminates the need for bulky torch with a gas valve.
Thermal overload protection with indicator lights helps prevent machine damage if the duty cycle is exceeded or airflow is blocked.
Fan-On-Demand™ operates only when needed reducing noise, power consumption, and the amount of airborne contaminants pulled through the machine.
Wind Tunnel Technology™ is an Internal air flow that protects electrical components and PC boards from dirt, dust, and debris, greatly improving reliability.
LVC™ Line Voltage Compensation
Keeps output of the power source constant regardless of fluctuation in input power ± 10%.
Process
- Lift-Arc™ TIG (GTAW)
- Stick (SMAW)
Applications
- Dairy Industry
- Food/Beverage Industry
- Restaurant/Kitchen Repair
- Experimental Aircraft
- Petro/Chem Fabrication
- Shipboard Installation/Repair
- Maintenance and Repair
Specifications
Input Power
Rated Output Stick
- 70 A at 22.8 VDC, 115 VAC, 100% Duty Cycle
- 100 A at 24 VDC, 115 VAC, 35% Duty Cycle
- 100 A at 24 VDC, 230 VAC, 100% Duty Cycle
- 150 A at 26 VDC, 230 VAC, 30% Duty Cycle
Rated Output TIG
- 100 A at 14 VDC, 115 VAC, 100% Duty Cycle
- 150 A at 16 VDC, 115 VAC, 30% Duty Cycle
- 100 A at 14 VDC, 230 VAC, 100% Duty Cycle
- 150 A at 16 VDC, 230 VAC, 30% Duty Cycle
Welding Amperage Range
- TIG: 5 - 150 A, 115 VAC
- TIG: 5 - 150 A, 230 VAC
- Stick: 20 - 100 A , 115 VAC
- Stick: 20 - 150 A , 230 VAC
Net Weight
